Dual La2a - [silent:arts] version

This section is for registered users to discussspecific projects and troubleshooting.

Moderatoren: TVPstudio, kubi

jcpanizza
Beiträge: 6
Registriert: Do Jul 21, 2011 1:10 pm

Beitrag von jcpanizza »

Hi,

I am a new member on this forum and i've been making diy audio stuff for4 years.
I've started to build a d-LA2A with volker's board and i'm almost finished.
My unit is wired and I made some tests last week, everything works fine except there is no peak reduction at all.

I'm wondering if my drip 'T4b' could be faulty? because the same thing happens if the t4b is out of the board. I opened one of my drip t4b to look inside but i'm not sure what it should look like.

any thoughts?

jensenmann
Beiträge: 2904
Registriert: Fr Mär 24, 2006 9:20 pm
Wohnort: Karlsruhe, BRD

Beitrag von jensenmann »

Did you try to swap both T4Bs? Does it happen in the second channel, too?
Check the PCB fpr solderblobs again.
Jens

jcpanizza
Beiträge: 6
Registriert: Do Jul 21, 2011 1:10 pm

Beitrag von jcpanizza »

it happens on both channels so i didn't try to swap both T4B's. I tried to run the unit without T4B's and the same thing happens (obviously!).
I'll double check my PCB.
thx for your answer ;)

jensenmann
Beiträge: 2904
Registriert: Fr Mär 24, 2006 9:20 pm
Wohnort: Karlsruhe, BRD

Beitrag von jensenmann »

bypass wired wrong?
Jens

jcpanizza
Beiträge: 6
Registriert: Do Jul 21, 2011 1:10 pm

Beitrag von jcpanizza »

The bypass is fine, i measured it and i can hear it too because de "gain" control works fine on both channels.
I also checked the "link" molex's as i was not sure how to wire it.

Now i am checking all the gain reduction stage looking for mistakes on my build...

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Beitrag von [silent:arts] »

disconnect the stereo link first.
if wired wrong no gain reduction will ever happen.

RV 103 / 203:
try it at both extreme settings (clockwise / counterclockwise)
volker
olafmatt hat geschrieben:Strom kann tot machen

jcpanizza
Beiträge: 6
Registriert: Do Jul 21, 2011 1:10 pm

Beitrag von jcpanizza »

i just disconnected both "stereo links"
now i have peak reduction on channel right!

the left channel is still not compressing though. and it has a little hum (right channel is hum-free)

i tried what volker said about RV 103 & 203, but there is no difference.
I'll try to find mistakes in my build, i guess it will be easier now that i have a working channel.

thx for your help guys!

jcpanizza
Beiträge: 6
Registriert: Do Jul 21, 2011 1:10 pm

Beitrag von jcpanizza »

I just noticed something else:
when I power up my unit with the meter in GR mode, le left channel vu meter indicates a "negative" gain reduction (+3 dB) for about 15 seconds and then it goes back to 0... the right channel (the one that is working perfectly) stays to 0 when i power up the unit.

Does this give you any idea?

I just finished checking my board for solder bridges or missing solder and everything looks fine to me... i'll keep looking!

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Beitrag von [silent:arts] »

doesn't sound like a problem, but might be the neon lamp
volker
olafmatt hat geschrieben:Strom kann tot machen

jcpanizza
Beiträge: 6
Registriert: Do Jul 21, 2011 1:10 pm

Beitrag von jcpanizza »

Hi Volker, thx for your answer.
The Neon lamp is shining, does this mean it works normally?
I'm gonna see if I have a spare neon lamp in my stock and replace it.

Organisator
Beiträge: 209
Registriert: Do Apr 26, 2007 2:11 pm
Wohnort: Köln

Beitrag von Organisator »

Darf ich hier auch auf Deutsch schreiben?

Ich habe statt der Neon Lampen 62 V Zener Dioden geholt, allerdings sind die zu dick für die Durchkontaktierung.
Aufbohren geht da ja schlecht, mir fällt sonst aber nur ein einen dünneren Draht z.B. Reste von Widerständen dran zu löten.
Spricht da was gegen?

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Beitrag von [silent:arts] »

Organisator hat geschrieben:Darf ich hier auch auf Deutsch schreiben?
eigentlich nicht, aber machen andere ja auch.
Organisator hat geschrieben:Ich habe statt der Neon Lampen 62 V Zener Dioden geholt, allerdings sind die zu dick für die Durchkontaktierung.
Aufbohren geht da ja schlecht, mir fällt sonst aber nur ein einen dünneren Draht z.B. Reste von Widerständen dran zu löten.
Spricht da was gegen?
fällt mir nichts ein (aber was für Zener hast Du denn? 10W???)
volker
olafmatt hat geschrieben:Strom kann tot machen

Organisator
Beiträge: 209
Registriert: Do Apr 26, 2007 2:11 pm
Wohnort: Köln

Beitrag von Organisator »

Ist ne 5 W/62 V Zener.

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Beitrag von [silent:arts] »

5W hat dickere Drähte, richtig.
5W braucht es aber auch nicht.
Nur zu.
volker
olafmatt hat geschrieben:Strom kann tot machen

Organisator
Beiträge: 209
Registriert: Do Apr 26, 2007 2:11 pm
Wohnort: Köln

Beitrag von Organisator »

1,3W reicht auch?
Dann hole ich mir lieber neue Zeners als ne Frickellösung zu machen.

Antworten