Enhanced Pultec DIY

This section is for registered users to discussspecific projects and troubleshooting.

Moderatoren: TVPstudio, kubi

nrgrecording
Site Admin
Beiträge: 1692
Registriert: Sa Mär 18, 2006 2:17 pm
Wohnort: Viersen (bei Mönchengladbach)

Enhanced Pultec DIY

Beitrag von nrgrecording »

ENHANCED PULTEC DIY

Here is the Thread about the Enhanced Pultec DIY Project.

Component Placement and PCB Layout.
http://www.nrgrecording.de/temporary/PultecV15.pdf
Wiring Layout.
http://www.nrgrecording.de/temporary/Pultec15wiring.pdf



FAQ:

Q: What is it?
A: Its an inductor based Equalizer. Based on the Pulse Technology Pultec EQP1A - but with more frequencies. The frequencies are the same as EveAnna's Manley Enhanced Pultec.

Q: Where can I get pcbs?
A: From Gustav at the prodigy forum
http://www.prodigy-pro.com/diy/index.php?topic=10776.0 18€ for gainstage and filter pcb
I heard that Gustav doesn't sell these pcbse anymore... back to the roots... here is the self-etch-file:
http://www.nrgrecording.de/temporary/En ... layout.pdf

Q: Whats the value of the inductor?
A: 26mH, 39mH, 78mH, 155mH, 312mH
Here is a shop for knobs and the inductor... http://don-audio.com/Startseite

Q: Can I make a tube pultec out of it?
A: Abselutely. You could use Gyraf's nice SRPP Tube Gainstage instead of the Opamp/PSU Gainstage.

Q: I can't find a capacitor with the value X or Y... What can I do?
A: You could wire some capacitors in parallel to get the value you're looking for. Ther are already some paralleled capacitors on the pcb because its easier to find these values in the electronic shops. If you don't have enough space you could solder capacitors to the bottom of the pcb - and don't tell anyone. :wink:

Q: Is there a frontpanel template?
A: Yo.

http://www.nrgrecording.de/temporary/Pu ... EQ%203.fpd
http://www.nrgrecording.de/temporary/Ma ... Pultec.fpd :lol:

Q: Is it active or passive?
A: There are two pcbs... one is the passive filter (so you could use it with other gainstages like Neve, tube, Gyraf SRPP, whatever) and there is a second, smaller pcb which has a simple opamp gain circuit and a power supply onboard.

Info: I will delete old postings and if there is some important information I will automatically add it to the the first posting.
Zuletzt geändert von nrgrecording am Mo Apr 19, 2010 6:03 pm, insgesamt 7-mal geändert.

benlindell
Beiträge: 4
Registriert: Sa Feb 20, 2010 8:23 pm
Wohnort: NYC
Kontaktdaten:

Beitrag von benlindell »

What are the required inductor values, I couldn't find these anywhere in the documentation.

Thanks,

Ben

nrgrecording
Site Admin
Beiträge: 1692
Registriert: Sa Mär 18, 2006 2:17 pm
Wohnort: Viersen (bei Mönchengladbach)

Beitrag von nrgrecording »

benlindell hat geschrieben:What are the required inductor values, I couldn't find these anywhere in the documentation.

Thanks,

Ben
Hi Ben.

The inductor values:

26mH, 39mH, 78mH, 155mH, 312mH

(its also written on the silk screen)
Frank Röllen. www.energyrecording.de [FORUM · DIY WEBSITE · TONSTUDIO]°°°° www.frontpanels.de [cnc gefertigte Frontplatten]°°°°

dingo
Beiträge: 3
Registriert: So Jan 24, 2010 9:28 pm

Beitrag von dingo »

hello!
what the difference from filter board V1 and V1.5
THANKS!!

nrgrecording
Site Admin
Beiträge: 1692
Registriert: Sa Mär 18, 2006 2:17 pm
Wohnort: Viersen (bei Mönchengladbach)

Beitrag von nrgrecording »

Ahem... don't know exactly. The circuit is the same. I think it was just some minor changes - probably I added a second inductor type which fits on the pcb? (can tell you exactly when you send me the V1 layout) ... or you just compare it yourselfs by looking to both layouts at the same time. :wink:
Frank Röllen. www.energyrecording.de [FORUM · DIY WEBSITE · TONSTUDIO]°°°° www.frontpanels.de [cnc gefertigte Frontplatten]°°°°

dingo
Beiträge: 3
Registriert: So Jan 24, 2010 9:28 pm

Beitrag von dingo »

Hello!!
few months ago reading on the forum i have found the enhanched pultec v1documentation
i have done some self etch whit v1
i am wiring inductors at moment
lo boost, lo cut ,hi cut, working ok
have 6db gain difference from bypass and active,
in the gain stage board
fixed whit two trimmes on r18k and r20k on the output
hope is right!!
i have understand the two different inductor size in v1.5
but i have found some little difference in the general layout
are there functional differences ?

thank you! :wink:

nrgrecording
Site Admin
Beiträge: 1692
Registriert: Sa Mär 18, 2006 2:17 pm
Wohnort: Viersen (bei Mönchengladbach)

Beitrag von nrgrecording »

dingo hat geschrieben:are there functional differences ?
I also did a home-etched version of the V1 board... loong time ago and it worked fine... so no problems here.
Take a look at the ugly edges of the pcb! :lol: prototype... :wink:

Bild

If you want to adjust the gain you could use a trimmer (manley also did it like this).

Frank.
Frank Röllen. www.energyrecording.de [FORUM · DIY WEBSITE · TONSTUDIO]°°°° www.frontpanels.de [cnc gefertigte Frontplatten]°°°°

dingo
Beiträge: 3
Registriert: So Jan 24, 2010 9:28 pm

Beitrag von dingo »


elektrolabel
Beiträge: 57
Registriert: Mi Dez 31, 2008 12:18 am
Wohnort: Mainz
Kontaktdaten:

Beitrag von elektrolabel »

Looks like. Question: Is this powered or passive ? I do not see any Power connector or similar ?

Also: does somebody have a panel design (.fpd) for this ?

nrgrecording
Site Admin
Beiträge: 1692
Registriert: Sa Mär 18, 2006 2:17 pm
Wohnort: Viersen (bei Mönchengladbach)

Beitrag von nrgrecording »

elektrolabel hat geschrieben:Looks like. Question: Is this powered or passive ? I do not see any Power connector or similar ?

Also: does somebody have a panel design (.fpd) for this ?
Its a passive filter but there is a second pcb with an opamp gaingstage and power supply.

Can upload a frontpanelfile tomorrow..

Frank.
Frank Röllen. www.energyrecording.de [FORUM · DIY WEBSITE · TONSTUDIO]°°°° www.frontpanels.de [cnc gefertigte Frontplatten]°°°°

nrgrecording
Site Admin
Beiträge: 1692
Registriert: Sa Mär 18, 2006 2:17 pm
Wohnort: Viersen (bei Mönchengladbach)

Beitrag von nrgrecording »

Frontpanel example files added to the first posting...
Frank Röllen. www.energyrecording.de [FORUM · DIY WEBSITE · TONSTUDIO]°°°° www.frontpanels.de [cnc gefertigte Frontplatten]°°°°

elektrolabel
Beiträge: 57
Registriert: Mi Dez 31, 2008 12:18 am
Wohnort: Mainz
Kontaktdaten:

Beitrag von elektrolabel »

Stupid question: What else it added at the "Mann Ey" one ? It's really tempting...

nrgrecording
Site Admin
Beiträge: 1692
Registriert: Sa Mär 18, 2006 2:17 pm
Wohnort: Viersen (bei Mönchengladbach)

Beitrag von nrgrecording »

elektrolabel hat geschrieben:Stupid question: What else it added at the "Mann Ey" one ? It's really tempting...
Was meinste genau? Wenn ich das englische ins deutsche übersetze verstehe ich nur so viel wie "Was sonst ist hinzugefügt bei dem "Mann Ey" teil" :?: :D
Frank Röllen. www.energyrecording.de [FORUM · DIY WEBSITE · TONSTUDIO]°°°° www.frontpanels.de [cnc gefertigte Frontplatten]°°°°

elektrolabel
Beiträge: 57
Registriert: Mi Dez 31, 2008 12:18 am
Wohnort: Mainz
Kontaktdaten:

Beitrag von elektrolabel »

Mal in deutsch: Was unterscheidet beide Versionen des pultec-frontpanels ?
sprich: welche features sind bei dem einen mehr dabei ?

nrgrecording
Site Admin
Beiträge: 1692
Registriert: Sa Mär 18, 2006 2:17 pm
Wohnort: Viersen (bei Mönchengladbach)

Beitrag von nrgrecording »

elektrolabel hat geschrieben:Mal in deutsch: Was unterscheidet beide Versionen des pultec-frontpanels ?
Nichts.
elektrolabel hat geschrieben:sprich: welche features sind bei dem einen mehr dabei ?
Keine.
Frank Röllen. www.energyrecording.de [FORUM · DIY WEBSITE · TONSTUDIO]°°°° www.frontpanels.de [cnc gefertigte Frontplatten]°°°°

Antworten